Watercolor Transfer Paper for Polymer Clay, 
Our Transfer Paper are laser printed on water-soluble paper.
Included with each transfer paper purchase is a step by step instruction sheet
Size :  10cm x 13cm 
Material: Water soluble transfer paper that dissolves in water between 5 to 10 seconds!
**Colors may vary from computer or mobile screen to paper**

HOW TO USE the Transfer Paper
1. Condition your clay and roll it onto a ceramic tile and ensure that it is well stuck on the tile
2. Lay the paper printed side down on the clay and secure it with an acrylic roller. Make sure that the design fully contacts the clay. Leave a little edge of raw clay around the transfer paper - this helps for the transfer paper to really stick and prevents water flowing underneath the paper
3. For a better transfer, let it sit for 10 minutes. 
4. Take your tile and hold it under very low water pressure. The paper will start dissolving itself. 
5. Let the clay slab dry before cutting it. You can either wait for it to dry on its own or gently tap it with paper towels 
6. Cut and bake as usual and sand if needed.
7. To increase the durability of the transferred design, I recommend sealing the finished piece with resin, polyurethane, or any shiny or matte sealant you prefer. Sealing will ensure the longevity of the transfer
   Note: 
The colors may slightly change during baking.
I recommend using white or light-colored clay for the most accurate colors and best results.